Gain full control over hazardous environments with the SG100-X Fixed Gas Detector, engineered for continuous, real-time gas monitoring. Designed for accuracy and reliability, it detects combustible, toxic, and oxygen levels while seamlessly integrating with industrial systems. Ensure safety, protect assets, and maintain compliance with confidence.
SG100 series is a cost-effective gas detector for continuous monitoring of toxic gases, oxygen, flammable, VOC gases. It is IECEx, ATEX certified, with intrinsically safe explosion grade. Having a 2 wire or 3 wire 4 to 20 mA analog output, RS485 modbus output, optional HART output, making it to be compatible with most control systems. With optional wireless data transmission, customer is able to review, download the data remotely. Support both magnetic and remote control, flexible for setting.
Product Feature
- IP66/IP68 water & dust resistant
- Intelligent plug and play sensor module. the module support calibration by Safegas PC software, making replacement and maintenance easier.
- With standard splash guard to protect sensor for outdoor installation or environment with water splash.
- Small and light, weight is only 1 kg, and the detector comes with standard mounting bracket, easy for installation.
- Standard 4-20 mA analog signal output and RS485 modbus signal output, optional Hart output, 2 wire output.
- Compatible with most of control systems.
- The detector comes with 3 relays, including low/high/fault alarm relay（Optional）
- Support both magnetic and remote control, flexible for setting.
Technical parameters
| Gas Detected: | Toxic gases, oxygen, Flammable, VOC gases |
|---|---|
| Detection Principle: | Electrochemical, NDIR, Catalytic, PID, etc |
| Measure range: | SpeciFied according to application |
| Resolution: | SpeciFied according to application |
| Accuracy: | ≤±2-5%FS (Depending on the speciFic sensor) |
| Explosion-proof grade： | IECEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb ； ATEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb |
| Protection grade： | IP66/68 |
| Power dissipation： | Toxic gas<2.5W，Flammable gas<4W |
| Communication mode： | 4-20mA(3-wires)、RS485 1～5V，Hart(Optional) |
| Wireless: | LORA, 4G(Optional) |
| Working voltage: | 12-24VDC |
| Relay: | 3 relays, including low/high/Fault alarm relay（Optional） |
| Display: | LED display |
| Working temperature: | -40℃～70℃（Catalytic sensor）， -20℃～50℃（Electrochemistry sensor） |
| Working pressure: | 86kPa~106kPa |
| Casing material: | Die casting aluminum, S316 For option |
| Cable Entries | 1 x ¾ NPT & 1 xM 20 Cable Entry Connections |
| Size: | 157.8x128.8x69.6mm |
| Weight: | 1.0Kg |
| Warranty： | 1 year |